We Strip It Back & Resurface It Properly
Flakes of coating lifting off the bath surface. Chunks peeling away every time you run the water. That rough, patchy look where the old paint has failed. Whether it was a previous DIY job or a cheap coating that didn't last, a peeling bath looks terrible and only gets worse.
The fix isn't to paint over it again. It's to strip the old coating completely and resurface with a professional two-part acrylic that bonds properly to the bare substrate. That's exactly what our bath resurfacing service does. And most jobs are finished in a single day.
1 Day
Most jobs
Up to 80%
Save vs new
5yr
Warranty
Bath coatings don't just peel for no reason. Understanding the cause helps you see why the old coating must come off completely before a new one can go on.
Want to know what actually caused it before you decide? Read Why Is My Bathtub Peeling? Causes and the Right Fix.
Hardware store bath paint is a single-part product designed for quick cosmetic touch-ups. It sits on the surface rather than bonding to it, and typically starts peeling within 6 to 12 months. It was never designed to be a permanent solution.
Even a decent coating will fail if the surface wasn't properly prepared. If the old coating was applied over a dirty, glossy, or unetched surface without proper priming, it never had a chance of lasting. Adhesion starts with preparation.
Even professional coatings have a lifespan. After 10 to 15 years of daily use, hot water, soap, and cleaning products, a coating will eventually start to break down. If your bath was resurfaced years ago, it may simply be due for a redo.
Abrasive cleaners, bleach-based products, and harsh chemicals strip the coating over time. They attack the surface layer, cause it to become brittle, and eventually it lifts and peels away from the substrate underneath.
It's tempting to just buy another tin of bath paint and go over the top. But here's why that approach fails every time.
When you paint over a peeling surface, the new coating bonds to the old flaking paint. Not to the bath itself. As the old coating continues to lift, it takes the new layer with it. You end up with the same problem again in weeks or months, plus you've now got two layers of failed coating to deal with.
Each additional layer makes the next repair harder and more expensive. The old coating traps moisture between layers, accelerating the failure.
All old coating must be completely stripped back to the bare substrate. Every trace of the failed paint or coating needs to come off. The underlying surface then needs to be sanded, etched, and primed so the new coating bonds directly to clean material.
It's about adhesion. A professional two-part acrylic coating applied to a properly prepared surface bonds at a molecular level. Not just sitting on top. That's the difference between a coating that lasts years and one that peels in months.
Our process strips the bath back to bare substrate and builds up a factory-quality finish that bonds properly and lasts for years.
Every trace of the old peeling coating is stripped back to the bare substrate. We use professional stripping methods to remove all layers of failed paint, leaving a clean surface with nothing for the new coating to delaminate from.
With the old coating removed, we inspect the underlying bath surface for any chips, cracks, or damage. These are filled and smoothed to create a uniform base for the new coating to sit on.
The bare surface is sanded to create a mechanical key, then chemically etched to open the pores of the substrate. This dual preparation ensures maximum adhesion. The coating grips the surface rather than sitting on top of it.
A specialist bonding primer is applied to the etched surface. This primer is specifically formulated for bath substrates and creates the chemical bridge between the bare surface and the top-coat system.
A professional two-part acrylic coating is spray-applied in multiple layers using specialist equipment. Spray application gives a smooth, even finish with no brush marks. Identical to the factory finish on a brand-new bath.
The coating is left to cure in controlled conditions. Within 24 hours it hardens to a smooth, glossy, factory-quality finish that is resistant to chipping, staining, and everyday wear. Your bath looks and feels brand new.
Send us a few photos and we'll have a fixed-price quote back to you within 1 business day. No obligation.
Not all bath coatings are equal. Here's how hardware store bath paint compares to a professional resurfacing job.
CRISTER RONADO SEWWY
6 months ago
Marko and Allan were great to work with. Their communication was clear and they always replied quickly, mostly through text, which made everything easy. The tub and tile look awesome, and I’m really happy with the result.
Ann Dasher
6 months ago
I contacted this company to resurface my parent's old bathtub. We had originally planned on a replacement, but after several quotes, resurfacing turned out to be much more cost-effective. Fast quote and easy appointment booking and work carried out on the agreed date.
Mark Micallef
20 days ago
I couldn’t be happier with the service from Timeless Resurfacing\. I had an old ceramic toilet cistern lid that had broken into four pieces, and finding a replacement was virtually impossible\. Allan was extremely helpful and professional from the beginning, and Sam did a fantastic job repairing and resurfacing the lid\. Considering the condition it was in, the finished result is remarkable\. Great communication, excellent workmanship and a company I’m very happy to recommend\. Thanks again to Allan and Sam\!
anthony pham
16 days ago
Just got my bathroom fully resurfaced. Took about 3 days and it looks completely different now, and honestly feels like a brand new bathroom. Sam, Mick, and Allan were all easy to deal with, and kept me updated and got everything sorted without any hassle. Thanks again to Timeless Resurfacing, definitely recommend them for bathroom resurfacing!!
James Peaty
1 month ago
Timeless Resurfacing went above and beyond repairing the damaged acrylic bath tub in our apartment. Both cracked areas were patched beautifully, and the full resurface of the tub has made it look like brand new! Great communication and great work. Highly recommend their services!
Common questions about peeling bath coatings and professional resurfacing in Sydney.
Bathtub coatings peel for several reasons: a previous DIY paint job using hardware store bath paint that wasn't designed to last, poor surface preparation where the original coating was applied without proper etching or priming, natural age and wear as even professional coatings have a lifespan, or chemical damage from abrasive cleaners that strip the coating over time. Once peeling starts, it accelerates. Water gets underneath the coating and lifts more of it away.
No. And this is the most important thing to understand. Applying a new coating over peeling paint is one of the most common mistakes. The new coating bonds to the old flaking paint, not the bath surface itself, so it peels again within months. All old coating must be completely stripped back to the bare substrate before resurfacing. This is the only way to get proper adhesion and a long-lasting result.
A professionally applied two-part acrylic coating typically lasts 10 to 15 years with normal household use. This is significantly longer than DIY bath paint, which usually peels within 6 to 12 months. The difference comes down to proper surface preparation, industrial-grade materials, and spray application technique.
Bath paint is a single-part product you brush on from a tin. It sits on the surface and peels relatively quickly. Professional resurfacing uses a two-part acrylic coating that is spray-applied in multiple layers over a chemically etched and primed surface. It chemically bonds to the substrate, creating a factory-smooth finish that lasts years, not months. The preparation process alone. Stripping, sanding, etching, priming. Is what makes the difference.
The resurfaced bath is touch-dry within hours. We recommend waiting 24 hours before using the bath to allow the coating to fully cure and harden. After 24 hours it is ready for normal daily use. We'll leave you with care instructions to get the maximum lifespan from your new finish.
Standard finish is high-gloss white. The most popular choice and matches modern bathroom fittings. Light custom tints (cream, off-white) available by request. Just mention it in your quote.
Yes. Once we strip the old peeling coating, we repair any chips, cracks, or damage in the underlying bath surface before applying the new coating. The finished result is smooth and even across the entire bath. No bumps, ridges, or imperfections.
Send us 3-4 photos of your peeling bath through our contact page and we'll have a fixed-price quote back to you within 1 business day. No call-out fee, no obligation. You can also call us directly on 0451 110 154.
While we're resurfacing your bath, it's often worth tackling other bathroom issues at the same time. Saving you time and a second visit.
Send us a quick photo and a few details and we’ll send you a fixed-price quote within 24 hours.
No pressure. No hidden fees. Just your bathroom, renewed.
